|
All Factory Order Custom Jets
include extra Canopy, extra Nose Cone
and bottles of touchup paint at no additional cost
Up to a $40 Value
Custom Factory Built to your
Specifications
F9F-8 Cougar - Choice of Color Schemes
Model is made
from New High Density SEPO Foam and NOT to be confused
with the EPS form offered by other "discount online sites".
Factory installed Metal Base Retracts
To further protect your valuable purchase we ship All RC
Lander Jets
in Custom Made 200# Test OUTER shipping cartons built to our
specifications!
(Does NOT Include transmitter, receiver,
servos, fan unit, motor, ESC, battery)
(Completely Painted
with Retracts
Included)
Requires Assembly
Now in Super
EPO Foam, Metal Base Retracts and Pilot
Special Order Color Scheme with
Operating Flaps,
Suspension Strut Retracts, Operating Gear Doors,
LEDF68-1A21 6S Ducted Fan, HobbyWing ESC,
Servos for Control Surfaces, Gear Door for Retracts and MORE!
and get a spare
nose cone, spare canopy and touch-up paint
Special Order with Operating Gear Doors or Suspension Strut Retracts
or Both for as little as $57.00 more!
For great
additional savings
choose Motor, ESC, Battery
and other Options at bottom of page before you add to cart!
- Wingspan: 880mm (34.5 in)
- Length: 1000mm (40 in)
- Height: 300mm (11.81 in)
- Flying Weight: 1000 to 1300g (35+ oz)
-
Function: Retract landing gear system
-
Full scale Retract Gear Door Performance as an option
-
Full scale flap performance as an option
- Drive System Minimum Required: EDF
68-69mm Ducted Fan with Brushless Motor
(4370kv
motor)
- Drive System
Suggested: EDF 68-69mm Ducted Fan with Brushless
Motor (3575kv motor)
- Servo Required: 4 to
10 X
9g high speed micro servos
- Speed Controller Required:
60 or higher amp Brushless Speed Control
- Battery Required: 11.1V
3S 3000mah or higher Li-Polymer
- Battery Suggested:
14.8V 4S 3300mah or higher Li-Polymer
- Control system Required:
4 to 6 CH Multifunctional FM Radio Transmitter and 4 to 6 CH Micro
Receiver
|
|
- Completely Painted with Retractable Landing Gear Included!
- Fully aerobatic characteristics; inside loops, outside
loops, axial rolls, inverted flight, knife edge, stall turns,
hammerheads, and spins are possible
- The wing and body used in this jet are specially designed
to allow high G maneuvers, yet the wing loading is still very
low
- Powerful ducted fan with brushless motors makes it
possible to fly this plane at high speed in the situations
with much wind
- Excellent stability of nosing up and down
- One of the best ducted fan jet in the market!
- Steerable nose landing gear
- Ready to Fly in just a couple of hours!
- Super tough, lightweight airframe!
- Scale appearance, great attention has been given to
details
- Shock Resistant Reinforced Fuselage and Strong Wings
- Can Take Off From Ground or can be Hand Launched
- Ground Take-Off can be performed easily
- Excellent Flight Performance
- Super easy and super stable electric powered scale R/C
park flyer for middle-level users to advanced-level users.
- Stable inverted flight
- Superb Quality, Simply the Best RTF Jet you can find!!!
- Super stable, Super low speed for safety,
Super low altitude for fun
- Fabricated by accurate molds with high fidelity of real
airplane
- One of the Best Looking Jet in the market
- Excellent stability and aerobatic capability
- Detailed Body Structure
- High roll rate
- Slow Speed Flying Capable
- Suitable for experienced pilots
- Approximately 5-15 minutes flight time on each charge Li-
poly battery will help to achieve better performance and
longer flight time.
-
Easy to Assemble -
Required to
Complete:
4 to 6channel transmitter and 4 to 6 channel
receiver
Ducted Fan Unit and Brushless Motor
60 or higher amp ESC
9 gram x 4 to 10 servos
( 2 pcs Aileron, 1 pc Rudder, 1 pc
Elevator, 1 pc Nose Steering, 2 pcs Flaps, 3 pcs Gear Doors )
11.1V 3S 3000mah or higher
LiPo Battery
airframe, retracts and Pilot
only 129.95
USPS Shipping fee applied at
checkout
(Canada,
Hawaii, Alaska, Guam,
Puerto Rico, Europe extra)
Factory Demo of F9F2 Operating Gear Door Option
Now
available with Heavy Duty Carbon Fiber Gears and Ball Bearing Servos
 F9F-8
Operational Manual
Gear Door Install Manual
|
68 mm EDF Units at a
Glance |
| |
Material: |
Weight: |
Rotor |
Max rpm |
Application |
Thrust |
|
LEDF68-1AP39 |
Aluminum Alloy,
Metal special |
202g |
68mm dia.,
5-bladed |
40,000rpm |
200-500w
3900kv |
up to 780g
11.1V 3S |
|
LEDF68-1A43 |
Aluminum Alloy,
Metal special |
240.8g |
68mm dia.,
5-bladed |
45,000rpm |
200-700w
4370kv |
up to 1.2kg
11.1V 3S |
|
LEDF68-1A39 |
Aluminum Alloy,
Metal special |
202.2g |
68mm dia.,
5-bladed |
40,000rpm |
200-500w
3900kv |
14.8v 4s: 1.1kg
11.1v 3s: 780g |
|
LEDF68-1A35 |
Aluminum Alloy,
Metal special |
245g |
68mm dia.,
5-bladed |
47,000rpm |
200-700w
3575kv |
up to 1.4kg
14.8v 4S |
|
LEDF68-1A21 |
Aluminum Alloy,
Metal special |
242g |
68mm dia.,
5-bladed |
47,000rpm |
200-700w
2399kv |
up to1.6kg
22.2v 6s |
|
|
Factory Installed
RCLander Servos at a Glance
all operating voltage 4.8 - 6.0 volts with Futaba, JR
Plugs |
|
Servo Model |
Special Features |
Weight: |
Size |
Speed / Stall @ 4.8 Volt |
Speed / Stall @ 6.0 Volt |
Recommended Application |
|
LANDER LS-1 |
No Special Features
Sold as Economy Servo by most competitors with factory
installed features - Not recommended for Gear Doors or
Retracts
Retail: $5.95 each |
8.0g
(0.28 oz) |
22.5X12.8X23.3mm
(0.88x0.50x0.92in) |
Speed:
0.15 sec/60°
at no load
Stall:
≥1.0 kg. cm
(14.0 oz/in) |
Speed:
0.17 sec/60°
at no load
Stall:
≥1.2 kg. cm
(16.8 oz/in) |
Economy Servo
Control Surfaces Only! Aileron, Rudder, Elevator
NOT recommended for Retracts, Steering
or Gear Doors |
|
LANDER LS-2 |
Carbon Fiber Gears with
Ball Bearings
Retail: 12.95 each |
9.0g (0.32 oz) |
23x11.8x25.6mm |
Speed:
0.12 sec/60°
at no load
Stall:
≥1.8 kg. cm
(25.02 oz/in) |
Speed:
0.10 sec/60°
at no load
Stall:
≥2.0 kg. cm
(27.08 oz/in) |
Better Duty Life
The Minimum recommended for Control Surfaces
and MINIMUM required for Gear Doors and
Retractable Gears |
All have a Standard
Direction of Counter Clockwise / Pulse Traveling 1500
to 1900u sec
All have PWM Input Range: Pulse Cycle 20 ±2ms,
Positive Pulse 1~2ms |
|
| Jet Model Type |
Battery size
for EDF (3s/4s) |
Battery size
for EDF (6s) |
| F9F-2 |
2500mah-5000mah |
2500mah(3s) X 2 |
| F9F-8 |
2500mah-5000mah |
2500mah(3s) X 2 |
| F-16 |
2500mah-5000mah |
2500mah(3s) X 2 |
| Rafale |
2500mah-4500mah X 2 |
2500mah(3s) X 2 |
| Hawker Hunter |
2500mah-5000mah |
2500mah(3s) X 2 |
| Mig-17 |
3700mah-5500mah X 2
(8S) |
3700mah-5500mah X 2 |
|
* Please Note: Custom Factory Installed
Options may take from One to Three weeks from your paid order for
completion. These are done at the RC Lander Factory and then returned to
us for delivery.
Factory carton is usually equal to or larger than 39 "x 11" x11"
We ship the factory carton in a 200# outer carton to insure the safe
arrival of your new Jet.
Outer shipping cartons are 40" x 12" x 12" or larger. The
usual total shipping weight of a Custom Jet varies from 12 pounds to 15
pounds depending on the options and accessories shipped in the carton.
|
All custom factory built orders that include any
retractable gear door option
AND any EDF option will now include
a spare nose cone, spare canopy and and touch-up paint at no
additional Cost! |
|
|
Available Options:
| *Choice of Retracts:
|
| |
| *Factory Installed Custom Option:
|
| |
| Color Scheme Choice:
|
| |
| ControlSurface Servos:
|
| |
| Ducted Fan with Motor:
|
| |
| ESC with or without BEC:
|
| |
| ESC: UBEC for Opto ESC:
|
| |
| Lighting System Controller:
|
| |
|
